,

Annette + Annabelle Corsets, PDF sewing patterns, Madalynne Intimates

9.0016.00

Small Bobbins is thrilled to offer instant PDF sewing patterns by Madalynne Intimates!

From Madalynne, “Annabelle + Annette are simple, single layer underbust and waspie corset sewing pattern. Both are great pattern for all levels sewists to learn fundamental corset making skills and techniques without worrying about fitting the bust. The pattern was drafted to give minimum waist reduction (1-2″ / 2.5-5cm) so that it could be worn as a foundation garment as well as outerwear.”

Other features include:

  • 12 panels (six on each side)
  • Exposed boning channels (on Annabelle)
  • Optional waist stay
  • Optional chain detail
  • 2″ (5cm) lacing gap at back
  • Bias binding at top and bottom edges

These patterns are available in English only, and include A4, A0, projector and US-letter formats.

These patterns can be purchased separately or bundled together! What’s the difference between Annette and Annabelle? From Madalynne:

  • Annette includes a busk at the center front, so there is a center front facing piece so that it can be inserted and clean finished. There is no busk in the Annabelle.
  • The construction of Annette and Annabelle are different. The vertical seams on Annabelle are sewn with wrong sides together and the bone casing is exposed. The vertical seams on Annette are sewn with right sides together and the bone casing is on the inside. There are other minor differences in construction, but those are the two main ones.

Both patterns include both a waspie and an underbust version.

See photos for the Size Guide and required materials, or read below for more information.

SKU: N/A Categories: ,

The Annette + Annabelle Corsets were designed for waist measurements between 24-41″ (61-104cm).

When you purchase this PDF sewing pattern, you will receive the pattern as a PDF file, and fully illustrated instructions in (only!) English. After payment is completed, you will receive an email with links to download your PDF files. Please download the files and save them onto your device.

Required materials:

Annette Waspie:

  • 60cm (5/8 yard )main fabric: coutil, drill, twill
  • 1m grosgrain ribbon (optional)
  • 18cm (7″) busk
  • 2 pieces, 16cm spiral steel boning
  • 2 pieces, 14cm spiral steel boning
  • 6 pieces, 12cm spiral steel boning
  • 4 pieces, 12cm flat steel boning
  • 2.75m twill tape, 0.95-1.6cm wide (3/8-5/8″ wide), for boning channeling
  • 2.75m coutil, twill, drill, 1.3cm-wide finished (1/2″), for bias binding. (If using bias binding made from main fabric, there is a bias binding pattern and instructions on how to make included with the files. You can use premade bias binding if you prefer.)
  • 10 eyelets, 4-5mm wide, for lacing
  • 4.5m string, ribbon or any non stretch tie, for lacing

Annette Underbust:

  • 60cm (5/8 yard) main fabric: coutil, drill, twill
  • 1m grosgrain ribbon (optional)
  • 25cm (10″) busk
  • 6 pieces, 23cm spiral steel boning
  • 4 pieces, 22cm spiral steel boning
  • 4 pieces, 23cm flat steel boning
  • 2.75m twill tape, 0.95-1.6cm wide (3/8-5/8″ wide), for boning channeling
  • 2.75m coutil, twill, drill, 1.3cm-wide finished (1/2″), for bias binding. (If using bias binding made from main fabric, there is a bias binding pattern and instructions on how to make included with the files. You can use premade bias binding if you prefer.)
  • 20 eyelets, 4-5mm, for lacing
  • 5.5m string, ribbon or any non stretch tie, for lacing

Annabelle Waspie:

  • 1/2m (1/2 yard) main fabric: corset mesh
  • 1/4m (1/4 yard) combo fabric: coutil, drill, twill
  • 1m grosgrain ribbon (optional)
  • 1 piece, 18cm spiral steel boning
  • 2 pieces, 16cm spiral steel boning
  • 2 pieces, 14cm spiral steel boning
  • 6 pieces, 12cm spiral steel boning
  • 4 pieces, 12cm flat steel boning
  • 1.8m bias binding, 0.95cm-wide finished, for boning channeling
  • 1.8m bias binding, 1.3cm-wide finished, for finishing top and bottom edges. (Recommended to use bias binding maker for wider bias binding.)
  • 10 eyelets, 4-5mm wide, for lacing
  • 2.75m string, ribbon or any non stretch tie, for lacing
  • Optional decorative chain: 25cm stretch or non-stretch trim (0.95-1.3cm wide, 3/8-1/2″ wide), spring gate ring (0.95-1.3cm wide / 3/8-1/2″ wide), 1.5m chain (3mm wide, 1/8″ wide)

Annabelle Underbust:

  • 1/2m (1/2 yard) main fabric: corset mesh
  • 1/4m (1/4 yard) combo fabric: coutil, drill, twill
  • 1m grosgrain ribbon (optional)
  • 1 piece, 25cm spiral steel boning
  • 6 pieces, 23cm spiral steel boning
  • 4 pieces, 22cm spiral steel boning
  • 4 pieces, 23cm flat steel boning
  • 1.8m bias binding, 0.95cm-wide finished, for boning channeling
  • 1.8m bias binding, 1.3cm-wide finished, for finishing top and bottom edges. (Recommended to use bias binding maker for wider bias binding.)
  • 20 eyelets, 4-5mm wide, for lacing
  • 4.5m string, ribbon or any non stretch tie, for lacing
  • Optional decorative chain: 25cm stretch or non-stretch trim (0.95-1.3cm wide, 3/8-1/2″ wide), spring gate ring (0.95-1.3cm wide / 3/8-1/2″ wide), 1.5m chain (3mm wide, 1/8″ wide)

Due to the digital nature of this product, no refunds will be issued.

© Madalynne Intimates

Pattern

Annette, Annabelle, Annette + Annabelle bundle